Meta LLaMA 7b on Win 11 RTX3070

I’ve been playing with Stable Diffusion locally for a while and meant to make a post about getting torch-directml setup to work on WSL with CUDA, but haven’t got around to it. This is basically the same process with even easier instructions to follow. Here’s a Reddit post documenting the process: [D] Tutorial: Run LLaMA … Read more

Runic Investigations

Digging into the Elder Futhark on Wikipedia, as one does. I forgot that each rune had a name. The names using the associated letter is an example of acrophony The Elder Futhark can be roughly transliterated into the Roman alphabet and vice versa. For example, my transliterated name in the Elder Futhark is ᚱᚨᛚᛖᛁᚷᚺ.

Burning Optiboot bootloader on an ANET 3D printer clone

Anet Bootloader

I recently tore apart my cheap 3D printer to put on acme leadscrews and figured it was a good time to try upgrading the stock firmware to Marlin. First grab this ANET board definition: https://github.com/SkyNet3D/anet-board Install the board definition per your OS default. You should now see ANET 1.0 (Optiboot) in your Arduino Tools > … Read more